HoldingTank
From Wikisea
Revision as of 13:47, 27 April 2016 by WikiSysop (Talk | contribs) (Created page with "Holding Tanks == Requirements == Regulations require holding tanks to be an integral part of the hull, or similarly securely attached. If attached, a neoprene buffer should...")
Holding Tanks
Requirements
Regulations require holding tanks to be an integral part of the hull, or similarly securely attached. If attached, a neoprene buffer should be used between the tank and any chafing points. Tanks must have an external level indicator, and a ventilation system fitted with a flame screen. The level indicator must show when the tank is ¾ full (USA regulation 33 CFR 159.83). Consider an alarm when 75%percent full. If the output pipe is fitted with “Y” valves, to switch between pump-out and overboard discharge, the “Y” valve must be padlocked in Canadian waters so that sewage cannot be pumped overboard. Similar restrictions apply in USA No Discharge areas.
Construction
Choices of material for a holding tank are:
- Polyethylene
- Fibreglass reinforced plastic
- Metal
